Welcome to Messig Electronics&Technology Co.,Ltd.
-
-
Mon - Fri 9:30 - 19:00, Sat、Sun - CLOSED
Call Anytime
+(852) 3069 7962
Welcome to Messig Electronics&Technology Co.,Ltd.
Mon - Fri 9:30 - 19:00, Sat、Sun - CLOSED
Call Anytime
+(852) 3069 7962
Control and wheel Grease
With excellent resistance to water andmechanical stability and colloidal stability,Excellent high and low temperature performance with a useful temperature range of -60°C to +200°C.Specially designed for aviation lubrication, suitable for the lubrication of various rolling bearings of aircraft flat tail bearings, control, landing gear, wheel systems.
Gears and Bearings Greease
Excellent anti-rust and protective properties, water resistance and adhesion.Suitable for the lubrication of aircraft's heavy-duty gears, flap control mechanism, tail wheel and landing gear fulcrum bearings, and other mechanical parts such as screw transmission.
General Aviation Grease
Excellent extreme pressure water resistance, high temperature resistance, excellent corrosion and rust resistance, good adhesion and high temperature reversibility.It is suitable for industries such as steel, metallurgy, railway, power generation, aviation and so on. Especially in the presence of high temperature, humidity, corrosion, heavy load, and shock load.
Motor Bearing Grease
Good high and low temperature performance, mechanical stability, colloidal stability and water resistance. with a useful temperature range of -60°C to +200°C. Used primarily in lubrication of various rolling bearings of aviation motor bearings and other industrial devices operating under high temperature conditions
Bearing and Accessory Grease
Excellent resistance to water and wide temperature range performance, with a useful temperature range of -60°C to +150°C. Inhibited against corrosion of the external environment.Used primarily in corrosive medium contact friction components, such as metal-to-metal or metal-rubber contact surface, for lubrication and sealing. It can also be used for the lubrication of rolling bearings.
Low temperature grease
Excellent low-temperature starting torque and operating torque, meeting the low-temperature starting requirements of high-precision aviation instruments with low starting power, and having high load carrying capacity, meeting the working requirements of aircraft control systems and transmission systems. with a useful temperature range of -73~120℃.
Turbine engine grease
Excellent thermal oxidation stability, rust resistance, high and low temperature performance and viscosity-temperature performance, with a useful temperature range of -50℃～+175℃.It is suitable for long-term lubrication of aviation gas turbine engines, ground power stations powered by aviation turbine engines, and gas-steam combined cycle units.
Gear bearing grease
Grease 7012 is suitable for the lubrication of aircraft's heavy-duty gear, flap control mechanism, tail wheel and landing gear fulcrum bearings, as well as radar assembly connections, instrumentation and other high-speed ball bearings.
Grease 7008 is a general aviation grease refined from a soap-based thickener thickened synthetic oil, and added with a structure improver, an antioxidant additive and an anti-rust additive.The useful operating temperature range is -60°C to +120°C
China: Meets SH 0437—92（1998）
U.S. : Meets MIL-G-3278A
British : Meets D.T.D825B
Mobil Beacon 325
AeroShell Grease 7
Grease 7008 is designed specifically for aviation lubrication, it is a multi-purpose aviation grease. It is suitable for the lubrication of aviation motor bearings and gears, operating mechanism pivots, assembly connections, and certain instruments and meters. It is also suitable for the lubrication of high-speed ball bearings.
Appearance:Yellow-brown uniform oil paste
Drop point（°C）:177
1/4 cone penetration, 0.1mm:69
Oil separation ％（m/m）:16.9
Evaporation loss（120℃），％（m/m）:0.81
corrosion（T3 copper，100℃，3h）:Pass
resembling viscosity（-50℃，10s-1）, Pa.s:836
Chemical stability（0.78MPa oxygen pressure，100℃，168h），Pressure drop，MPa:0
Protection performance（45# Steel sheet，H62 brass sheet，60℃，48h）:Pass
*Not updated yet.
●When using, the lubrication parts should be cleaned.
●When in contact with plastic materials, a plastic compatibility test should be done first, and it can be used only when it is compatible.
●During storage and use, prevent moisture and impurities from being mixed in.
Grease 7014 is made of synthetic oil thickened with organic thickener and added with antioxidants and other additives.The useful operating temperature range is -60°C to +120°C
China: Meets GJB 694—89
Dnヴリ-ス XCC-1#
SKF NO.28
Grease 7014 is Specially designed for aviation lubrication, but also suitable for a variety of civil lubrication, suitable for the lubrication of various rolling bearings that operate at high speed and wide temperature range such as aircraft flat tail bearings, control, landing gear, wheel systems, aircraft electromechanics, generators, etc. It can also be used for the lubrication of electric mechanisms and general gears.
Appearance: Light brown uniform oil paste
1/4 cone penetration, 0.1mm: 65
Standard penetration: 269
Drop point（°C）: 322
Oil separation ％（m/m）: 8.11
Evaporation loss（200℃,1h），％（m/m）: 2.97
corrosion（T3 copper，100℃，3h）: pass
corrosion（T2 copper，100℃，24h）: 1b
Water resistance（41℃±1℃）, %（m/m）: 1.45
resembling viscosity（-50℃，10s-1）, Pa.s: 664
●Excellent high and low temperature performance, to ensure the normal operation of the bearing in a wide temperature range.
●Good lubricity, protect the bearing and reduce wear.
●Good water resistance, suitable for bearing lubrication in humid environment.
●Excellent mechanical stability and colloidal stability to avoid loss of grease.
●Excellent oxidation stability to prevent high temperature deterioration of grease.
●Good rubber adaptability, adapt to most rubber.
●Excellent storage stability, long-term storage product performance remains unchanged.
●Excellent comprehensive performance to ensure a long service life of high-speed bearings.
●Do not mix with other greases. Physical or chemical reactions between different greases may cause performance degradation.
●Seal the cover in time after use to avoid mixing of moisture, dust and other impurities.
Grease ZL7-2 is a general-purpose high and low temperature extreme pressure grease refined with soap-based thickeners to thicken synthetic oils, structure improvers, antioxidant additives, and excellent anti-rust additives.
*Not updated yet.
*Not updated yet.
Grease ZL7-2 is a multi-purpose low-temperature aviation grease. It is suitable for the lubrication of medium-load gears, flap control mechanisms, tail wheels and landing gear fulcrum bearings of aircraft, as well as the lubrication of radar assembly connections, certain instruments, meters, and power plant equipment. Suitable for lubrication of high-speed ball bearings. Suitable for lubrication of various bearings, gears, chains and other transmission mechanical parts at low temperatures.
*Not updated yet.
●Good high and low temperature performance, to ensure the normal operation of lubricating parts in a wide temperature range;
●Good oxidation stability, to ensure long-term normal operation of the lubricated part at high temperature;
●Good mechanical stability and extreme pressure, to ensure that the product normally adheres to the lubrication part and will not be lost;
●It has excellent rust resistance and effectively protects the metal parts of the bearing from external corrosion.
●Please clean the parts that need to be lubricated before using for the first time. Do not mix with other lubricating products.
Grease 2# is a grease made from fatty acid lithium soap thickened olefin synthetic lubricating oil and added with antioxidants. This product has good low temperature performance, high temperature performance and water resistance.
China: Meets SH0375—92
Not update yet.
Grease 2# is specially designed for aviation lubrication, and it is also suitable for a variety of civil lubrication. It is suitable for the lubrication of aircraft's heavy-duty gears, flap control mechanism, tail wheel and landing gear fulcrum bearings, and other screw drives, chain drives and other mechanical parts. When cutting heavy workpieces, the lubrication and wear reduction of the thimble of the machine tool are suitable for lubricating parts that work in low temperature environments.
Appearance: Yellow to light brown or light pink uniform oil paste
1/4 cone penetration, 0.1mm: 295
Drop point（°C）: 190
Free alkali, NaOH%: 0.02
corrosion（T3 copper，100℃，3h）: Pass
resembling viscosity（-30℃，10s-1）, Pa.s: 900
Grease 2# has excellent anti-rust and protective properties, and effectively protects metal parts from external erosion. Excellent water resistance, to ensure that the product can be used in a humid environment. Good adhesion, to ensure that the product adheres to the lubricated part.
●Grease 2# Before use, please clean the lubricated parts before adding this product. Do not mix with other greases, and prevent dust and impurities from mixing during storage and use.
Grease 7011 is made of synthetic oil thickened with soap-based thickener, and added with molybdenum disulfide and additives such as anti-oxidation, anti-rust and structural improvement.
China: Meets SH/T 0438—92（1998）
Not updated yet.
Grease 7011 is used primarily in the lubrication of aircraft's heavy-duty gears, flap control mechanism, tail wheel and landing gear fulcrum bearings, and other screw drives, chain drives and other mechanical parts.
Appearance Black uniform ointment
1/4 cone penetration, 0.1mm: 65
Drop point（°C）: 180
Oil separation ％（m/m）: 16.04
Evaporation loss（200℃,1h），％（m/m）: 0.65
corrosion（T3 copper，100℃，3h）: Pass
resembling viscosity（-50℃，10s-1）, Pa.s: 890
Chemical stability（0.78MPa oxygen pressure，100℃，168h），Pressure drop，MPa: 0
●Excellent low temperature performance to ensure the normal operation of the bearing at low temperatures.
●Good lubricity, protect the bearing and reduce wear.
●Good mechanical stability and colloidal stability to avoid loss of grease.
●Low bearing loss tendency, to ensure the normal lubrication of the bearing.
●Excellent extreme pressure performance to ensure the normal lubrication of the bearing under heavy load.
●Should be stored in a clean, dry and dark place.
●When using, the lubrication parts should be cleaned.
●After activation, the box cover should be sealed tightly in time to prevent impurities from mixing in and affecting the use effect.
Grease ZN6-4 is made by thickening synthetic oil with inorganic thickening agent and adding high-efficiency additives such as antioxidant and anti-rust. It is refined by a special process.
China: Meets SHT0376-1992
*Not updated yet.
Grease ZN6-4 is suitable for industries such as steel, metallurgy, pulp, fresh water and sea water transportation, railways, power generation, automobiles, construction, and aviation. Especially in the presence of high temperature, humidity, water (including sea water), corrosion, heavy load, and impact load, the sealing and anti-rust grease exhibits its inherent superior performance.
*Not updated yet.
Excellent extreme pressure water resistance, abrasion resistance, and high temperature resistance, excellent anti-corrosion and rust resistance, good adhesion and high temperature reversibility, not easy to lose under high temperature.
●It should not be mixed with other lipids. Before use, ensure that the greased part is dry and clean.
●After opening, the container should be sealed in time to prevent impurities from entering to ensure good lubrication.
●It cannot be used for the lubrication of moist air or water contact parts.
No. 2 low temperature grease has a wide use temperature; it has good chemical stability and water resistance, and has good colloidal stability; it has excellent low temperature lubrication performance. Used for the protection and lubrication of the operating rod system of the aircraft, various precision instruments and radio equipment, as well as the rolling bearings and sliding bearings of various mechanical equipment with light load, high speed, and wide temperature range (-60℃︿120℃) and others Lubrication of worn parts.
China: Meets Q/SY YM 0029-2000
*Not updated yet.
*Not updated yet.
Appearance Milky white uniform ointment
1/4 cone penetration, 0.1mm: -75
Drop point（°C）: 170
Evaporation loss（60℃,24h），％（m/m）: pass
corrosion（T3 copper，100℃，3h）: pass
separation ％（m/m）: 0.05
Similar to viscosity（-50℃，10s-1）, Pa.s: 0.85
Chemical stability（0.78MPa oxygen pressure，100℃，168h），Pressure drop，MPa: 0
Free alkali, NaOH%: 0
*Not updated yet.
●It is not advisable to use a large container to store it in order to avoid oil separation; if there is a small amount of oil, it can be used after stirring or grinding at room temperature;
●All parts should be cleaned during use;
●This product should not be mixed with other lipids; after activation The container should be tightly closed in time to avoid mixing of impurities.
Grease 7016 is a high and low temperature grease made from synthetic oil thickened with organic thickener and added with antioxidants and other additives.
China: Meets Q/SH303 119—2004
Kluber TK44N3
TORAG SILICONE SH44
DOW MOLYKOTE44
Grease 7016 suitable for the lubrication of bearings of aviation motors (such as generators, motors, converters, etc.) and various rolling bearings of other industrial devices operating under high temperature conditions.
Appearance: Light yellow uniform ointment
1/4 cone penetration, 0.1mm: 62
Drop point（°C）: 315
Oil separation ％（m/m）: 10.35
Evaporation loss（200℃,1h），％（m/m:） 1.07
corrosion（T3 copper，100℃，3h）: Pass
resembling viscosity（-50℃，10s-1）, Pa.s: 383
Chemical stability（0.78MPa oxygen pressure，100℃，168h），Pressure drop，MPa: 0
*Not updated yet.
●Should be stored in a clean, dry and dark place.
●Avoid mixing of dust and impurities during storage, transportation and use.
●When in use, the lubrication parts should be cleaned, and the product should be filled after air-drying.
●Do not mix with other oils.
Grease 7017-1 is made by thickening synthetic oil with special organic thickener and adding a variety of high-efficiency additives.
China： Meets SH 0431—92（1998）
*Not updated yet.
It is suitable for the lubrication of rolling bearings that work in high temperature, high speed or severe cold areas and work in a wide temperature range above 200℃, such as the lubrication of high temperature operation running bearings such as aviation motors, electrical appliances, and clutch thrust bearings.
Appearance: Gray uniform ointment
1/4 cone penetration, 0.1mm: 72
Drop point（°C）: 330
Oil separation ％（m/m）: 7.34
Evaporation loss（200℃,1h），％（m/m）: 0.75
corrosion（T3 copper，100℃，3h）: pass
Chemical stability（0.78MPa oxygen pressure，100℃，168h），Pressure drop，MPa :0
resembling viscosity（-50℃，10s-1）, Pa.s :1492
Good high and low temperature performance, especially excellent high temperature performance, with long bearing life under high temperature.
Good water resistance, suitable for bearing lubrication in humid environment.
Good oxidation resistance, ensuring long-term use performance at high temperatures.
Good rust resistance, to ensure that the bearing parts are not rusted.
*Not updated yet.
Grease T221 is a grease refined from synthetic oil thickened with a compound thickener. It is inhibited against corrosion of the external environment and has excellent resistance to water and wide temperature range performance.The useful operating temperature range is -60°C to +150°C.
China: Meets SH 0459—92（1998）
ОКБ-122-221
It is suitable for corrosive medium contact friction components, such as metal-to-metal or metal-rubber contact surface, for lubrication and sealing. It can also be used for the lubrication of rolling bearings.
Appearance: Evenly smooth ointment
1/4 cone penetration, 0.1mm: 71
Drop point（°C）: 250
Oil separation ％（m/m）: 2.89
corrosion（T3 copper，100℃，3h）: pass
Free alkali, NaOH%: 0.03
resembling viscosity（50℃，10s-1）, Pa.s: 370
●Good lubricity, guarantee the normal lubrication of lubricated parts, protect lubricated parts to reduce wear.
●Good water resistance, suitable for lubrication of parts in humid environment.
●Good high and low temperature performance, to ensure that lubricating parts get normal lubrication in a wide temperature range.
●Good protection performance to ensure that the lubricating parts are not corroded by the external environment.
●When using, the lubrication parts should be cleaned.
●During storage, transportation and use, prevent moisture and dust pollution.
Grease 7112 is made of synthetic oil thickened with compound thickener and added with various additives such as anti-oxidation and anti-corrosion.
China: Meets SH/T 0445—92
*No update yet.
It is suitable for the lubrication of instruments, instrument bearings and other rolling bearings that work under light loads in a wide temperature range. Such as the lubrication of various aviation airborne motors, electrical appliances, instruments, electric mechanisms, and other instruments, meters and micro-motors with high requirements for low-temperature startability.
Appearance: Milky white uniform ointment
1/4 cone penetration, 0.1mm: 74
Drop point（°C）: 234
Oil separation ％（m/m）: 11.55
Evaporation loss（200℃,1h），％（m/m）: 1.25
corrosion（T3 copper，100℃，3h）: pass
resembling viscosity（-60℃，10s-1）, Pa.s: 283
●Excellent high and low temperature performance, to ensure the normal lubrication of the lubrication part in a wide temperature range.
●Excellent oxidation stability, to ensure that the bearing has a long life under high temperature.
●Good colloid stability, to ensure the stable performance of the grease.
●Good resistance to bearing leakage, to ensure that grease does not leak from the bearing, and provide sufficient lubrication.
●Before use, the greased area should be cleaned and blow-dried before filling the product.
●After activation, the lid of the box should be tightened in time to prevent impurities from affecting the use effect.
●Do not mix with other greases.
●Should be stored in a clean, dry and dark place.
Grease 7253 has excellent low-temperature starting torque and operating torque, meeting the low-temperature starting requirements of high-precision aviation instruments with low starting power, and having high load carrying capacity, meeting the working requirements of aircraft control systems and transmission systems.
*No update yet.
*No update yet.
●Suitable for lubrication of ball, cylindrical roller and needle roller bearings, gears, instruments, cameras, electronic equipment, etc.
●Applied to rolling and sliding surfaces of aircraft control systems and other equipment.
●Suitable for rolling and sliding surfaces of low starting power equipment. Generally used in aircraft gears, drive screws and other equipment requiring high-load performance lubricants in the temperature range of -73~120℃.
*No update yet.
*No update yet.
*No update yet.
Grease 931 is blended with lithium complex thickened high-viscosity synthetic hydrocarbon lubricating oil and added with an appropriate amount of anti-wear, anti-oxidant, anti-rust additives and structure modifiers.
China: Meets YLB19-2005
*No update yet.
Grease 931 is suitable for sealing and lubricating wheel bearings, engine accessories and other high temperature parts under high temperature conditions. The operating temperature range is -40℃～150℃.
1/4 cone penetration, 0.1mm: 210-260
Drop point（°C）: 250
Evaporation loss（100℃,22h），％（m/m）: 2
corrosion（T2 copper，100℃，24h）: 1b
*No update yet.
●Grease 931 should not be mixed with other greases, and all parts should be cleaned.
Grease 4109 is a type I 1/2 low-viscosity synthetic aviation lubricating oil refined with synthetic oil as the base oil and added with various additives such as antioxidant, anti-corrosion and anti-wear.
China: Meets GJB 135A-98
U.S.: Meets MIL-L-7808
*No update yet.
This product is suitable for aviation gas turbine engines, as well as for long-term lubrication of ground power stations and gas-steam combined cycle units powered by aviation turbine engines. It has been used for a long time in turbojet engines of supersonic fighters, and also used in the main oil system of helicopters and the starters of civil aircrafts.
Kinematic viscosity mm2/s （100℃）: 3.765
Kinematic viscosity mm2/s （-40℃）: 2842
open cup flash point ℃ :232
Freezing point, ℃ :-60
Neutralization value, mgKOH/g :0.2
Evaporation loss（205℃,6.5h），％（m/m） :5.76
●Excellent thermal oxidation stability to prevent deterioration of lubricating oil under high temperature;
●Good high and low temperature performance and viscosity temperature performance, which can meet the requirements of all-weather use;
●Good thermal stability and oxidation stability, which can reduce coking during operation;
●Good rust resistance, to ensure the long-term use of the engine;
●Less evaporation and less fuel consumption.
●In the process of storage, transportation and use, care should be taken to prevent the mixing of water, dust and other corrosive media;
●Do not mix with other oils;
●Store in a clean, cool and dry place;
●When used in lubricating parts that are in contact with non-metallic materials such as rubber, plastic, paint, etc., a material compatibility test should be carried out in advance;
Grease 7023 is a low-temperature lubricating grease refined with organic thickening agent to thicken semi-synthetic oil and adding various additives such as antioxidant and anti-rust.
*No update yet.
*No update yet.
*No update yet.
Appearance: Light yellow uniform ointment
1/4 cone penetration, 0.1mm: 73
Drop point（°C）: 250
Oil separation ％（m/m）: 12.38
Evaporation loss（200℃,1h），％（m/m）: 7.79
corrosion（T3 copper，100℃，3h） :pass
Water resistance（38℃±1℃）, %（m/m） :7.82
Chemical stability（0.78MPa oxygen pressure，100℃，168h），Pressure drop，MPa :0
resembling viscosity（-50℃，10s-1）, Pa.s :876
●Excellent low temperature performance, to ensure the normal lubrication of the used parts at low temperatures;
●Excellent anti-rust and protective properties, effectively protecting metal parts from external erosion;
●Good lubricity to ensure normal bearing lubrication and reduce bearing wear;
●Excellent storage stability to ensure the normal use of the product;
●Excellent colloidal stability and mechanical stability, to ensure that the product does not leak oil and is not easy to thin and lose;
●Good adhesion, to ensure that the product adheres to the lubricated part.
●Before use, please clean the lubricated parts before adding this product;
●Do not mix with other greases; during storage and use, prevent dust and impurities from mixing.
Grease 7012 is suitable for the lubrication of aircraft's heavy-duty gear, flap control mechanism, tail wheel and landing gear fulcrum bearings, as well as radar assembly connections, instrumentation and other high-speed ball bearings.
*No update yet.
*No update yet.
*No update yet.
Appearance :Black uniform smooth ointment
1/4 cone penetration, 0.1mm: 71
Drop point（°C）: 195
Evaporation loss（204℃,22h），％（m/m）: 2.18
corrosion（T3 copper，100℃，3h）: pass
Moisture % :0
resembling viscosity（-50℃，10s-1）, Pa.s: 770
*No update yet.
*No update yet.
Grease 7008
Advanced Multipurpose Airframe Grease
Excellent rust resistance and oxidation stability,with a useful temperature range of -60°C to +120°C.Used primarily in lubrication of aviation motor bearings and gears, operating mechanism fulcrums, assembly connections, and certain instruments and meters.
Grease ZL7-2
Multi-purpose low temperature grease
Excellent wide temperature performance, oxidation stability, mechanical stability and extreme pressure have excellent rust resistance.Multi-purpose low-temperature aviation grease, suitable for the lubrication of medium-load gears, flap control mechanisms, tail wheels and undercarriage fulcrum bearings of aircraft.
Grease 7011
Low temperature extreme pressure grease
Excellent low temperature performance, good lubricity and excellent extreme pressure performance. With a useful temperature range of -60℃～+120℃. Used primarily in Lubrication of aircraft's heavy-duty gears, flap control mechanism, tail wheel and landing gear fulcrum bearings, and other screw drives, chain drives and other mechanical components.
Grease 2
Low temperature Grease
Wide use temperature, good chemical stability and water resistance, and excellent low temperature lubrication performance.It is used for the protection and lubrication of the operating rod system of the aircraft, and the lubrication of various precision instruments and radio equipment.
Grease 7017-1
Aviation grease
Grease 7017-1 is made by thickening synthetic oil with special organic thickener and adding a variety of high-efficiency additives.
Grease 7112
Aviation airborne motor grease
Excellent resistance to bearing leakage, oxidation stability and colloidal stability, with a useful temperature range of -70℃～+180℃. Suitable for lubrication of instruments, instrument bearings and other rolling bearings that work under light load in a wide temperature range.
Grease 931
Wheel bearings and engine accessories Grease
Grease 931 is suitable for sealing and lubricating wheel bearings, engine accessories and other high temperature parts under high temperature conditions. The operating temperature range is -40℃～150℃.
Grease 7023
General Aviation Grease
Excellent anti-rust and protective properties, lubricity, colloidal stability and mechanical stability, with useful operating temperature range is -50°C to +140°C.